Chemical Analysis. Francis Rouessac

Чтение книги онлайн.

Figure 2.9 Example of a separation with a chiral phase which contains grafted cyclodextrins. The use of a chiral column to separate a racemic mixture of compounds (alcohols 2 and 4). This chromatogram in isothermal mode enables the calculation of retention indexes for the separated compounds.

      Indirect process

      Unlike the direct process, this process consists in creating a chemical reaction between the analyte and a chiral reagent, prior to the injection, to form diastereomers. As these have different physical properties, they should be separable with conventional phases. This longer process is not used as often as the direct one. It may cause a partial racemization of the analyte.

Chiral stationary phases for GC are mainly obtained from cyclodextrins (Figure 2.10), ring‐shaped macromolecules composed of six, seven or eight units of D(+)‐glucose. They look like cones, with a hydrophobic central cavity, which enables the selective and reversible inclusion of a large variety of compounds, such as diastereomeric complexes.

      After possible chemical transformation, cyclodextrins are either deposited on the internal surface of the capillary column or incorporated into a poly(dimethylsiloxane)‐type polymer or grafted onto the silanol functions of silica via a short carbonated chain. These can be used up to 200°C. Above this temperature, analytes can racemize.

      As a reminder, the other chiral vectors for GC, much less in use, are crown ethers and some asymmetrical diamides, which are progressively being abandoned (Figure 2.10).

      2.6.5 Solid Stationary Phases

These phases are made from a variety of adsorbent materials: silica or alumina deactivated by mineral salts, molecular sieves 5 Å (0.5 nm), porous glass or polymers, or graphite (e.g. Chromosorb^® 100, Porapak^®). Capillary columns made by deposition of these materials in the form of a fine porous uniform layer are called PLOT. They are employed to separate gaseous or highly volatile samples. Columns containing graphitized carbon black have been developed for the separation of N₂, CO, CO₂, and very light hydrocarbons. The efficiency of these columns is very high (Figure 2.11).

Figure 2.10 Chiral stationary phase in GC. Among the three chiral vectors encountered in GC (1 and 2, β‐cyclodextrins, 3, crown ethers, 4, diamides), cyclodextrins are by far the most commonly used. They include three types of sites: A, axial hydroxyl, B, equatorial hydroxyl and C, hydroxymethyl. Their reactivities are sufficiently different to enable selective reactions and thus obtain some 50 phases (e.g. 2, ungrafted cycloSil‐B phase from Chromoptic). Partial chromatograms of natural extracts, demonstrating the separation of optical isomers of carvone.

Figure 2.11 Gas analyses. Left, one of the earliest ever chromatograms, obtained point by point and representing a mixture of air, ethylene and acetylene separated on silica gel (E. Cremer and F. Prior, Z. Elektrochem. 1951, 55, 66). Right, an analysis of gas on a modern PLOT column (reproduced courtesy of Supelco).

      Historically, silica gel, a thermostable material that is insensitive to oxygen, was one of the first compounds to serve as a stationary phase for GC columns (Figure 2.11). Today, solid phases have become much more elaborate.

2.7 MAIN DETECTORS

Downstream from the column, the chromatograph has one last device: the detector, which provides a signal with the passage of each analyte. All of the signals will form the chromatogram. This detector uses variations in physical amplitude related to the presence of a solute, in addition to that of the carrier gas. Some detectors are universal; that is they are sensitive to practically every solute, while others are selective detectors that are sensitive only to specific compounds (Figure 2.14). The most effective rely on the adaptation of spectral methods, or on mass spectrometry, which not only helps generate the conventional chromatogram but also helps identify each solute (see the Chapter 16 on Mass Spectrometry). Nevertheless, this is expensive, and we always find a number of conventional detectors in laboratories.

      2.7.1 Universal or Near‐Universal Detectors

      Flame ionization detector (FID)

Considered as almost universal for organic compounds, this is the detector par excellence for GC. The gas flow issuing from the column passes through the flame of a small burner fed by a mixture of hydrogen and air. When a compound is eluted, its combustion results in the release of ions and charged particles responsible for the passage of a very weak current (10⁻¹² μA) between two electrodes (p.d. of 100–300 V). The signal is transformed by an electrometer into a measurable voltage (Figure 2.12). One end of the burner, held at ground potential, acts as a polarization (ground) electrode, while the ring‐shaped second electrode surrounds the flame.

Figure 2.12 FID detector (a) and NPD detector (b). The make‐up gas (or filling gas) is useful when the flow rate of the capillary column is too small. The electrometers used with detectors enable the measurement of intensities that would too small for a galvanometer. Many variants exist depending on the manufacturer.

      (Source (a): Modified from Cremer, E. and Prior, F. (1951), Anwendung der chromatographischen Methode zur Trennung von Gasen und zur Bestimmung von Adsorptionsenergien. Zeitschrift СКАЧАТЬ