Principles of Superconducting Quantum Computers. Daniel D. Stancil

Чтение книги онлайн.

СКАЧАТЬ is returned to the circulator and transferred to the final circulator at the bottom right.

The circulator at the bottom right is operated as an isolator. Power applied to the input (left port) is delivered to the output (top port), but any power reflected from impedance mismatches further down line, e.g., at the input of the HEMT amplifier, will be delivered to the matched load attached to the bottom port. In this way, the very sensitive quantum processor and quantum limited amplifier are isolated from reflected power or noise from the upper stages.

      The measured signal at this point is very weak, and we definitely would not want to use a stack of attenuators on the output line! Instead, a coaxial cable made of an alloy of Niobium and Titanium (NbTi) is used to convey the signal to the 3 K stage. NbTi is a Type II superconductor with a transition temperature of about 10 K, so it provides an extremely low loss path to the 3 K stage. At the 3 K stage, there is a more conventional low-noise amplifier (LNA), but made using a high electron mobility transistor (HEMT)—a type of transistor that is known for producing very low noise. The signal from the output of the HEMT LNA is further amplified at room temperature before delivery to the signal processing electronics.

      Returning to the control-signal electronics, any band-limited signal centered on the frequency ω can be represented by sine and cosine components:

(1.70)

      where I(t) and Q(t) are “in-phase” and “quadrature” functions whose time variations are slow compared with the period T=2π/ω. Digital samples of I and Q are converted to band-limited analog signals by digital-to-analog converters followed in general by low-pass filters to eliminate high-frequency components resulting from aliasing. The circular components in Figure 1.12 containing “×” are called mixers, and produce an output that is simply the product of the two input signals. For example, the bottom-most mixer produces Q(t)sin⁡ωt on its output. Similarly, the output of the next-to-bottom mixer is I(t)cos⁡ωt. The outputs of the two mixers are applied to a power combiner, shown as the square component with two terminals on the left, and one on the right. The output of the combiner is the sum of the two input signals, creating the desired general signal of the form given by Eq. (1.70). This circuit is referred to as an IQ modulator.

      There are different ways of combining RF signals, but the particular one shown is known as a Wilkinson combiner, or Wilkinson divider. Note that this component is reciprocal, so it can be used either as a combiner or a divider. An attractive feature of the Wilkinson circuit when used as a divider is that if all of the ports are matched, it does not introduce any loss.

      The output signal from the quantum processor is applied to a signal processing circuit at the top center of Figure 1.12 that is very similar to the IQ modulator used to generate the control signal. The signal is first split into equal parts using a Wilkinson divider, and the divided signals are multiplied by either cos⁡ωt or sin⁡ωt before being applied to low-pass filters. The effect of the low-pass filters is to integrate the applied signal, so since the cross term proportional to cos⁡ωtsin⁡ωt averages to zero, the filter outputs are proportional to either I(t) or Q(t). These signals are then digitized and analyzed by the classical computer.

      With this high-level description as motivation, we are now ready to discuss in detail the principles that underlie the hardware and software of superconducting quantum computing.

       Chapters 2 and 3 explore the quantum physics that determine the behavior of qubits and gates. This gives us the tools to understand the fundamentals of quantum states and how they can be manipulated.

       Chapters 4–8 show how qubits are constructed from superconducting devices, how they are coupled to each other with microwave transmission lines, and how they are controlled and measured by external systems.

       Chapters 9 and 10 discuss how imperfections in the systems we build affect the quantum information we are trying to process. In the near term, we need mechanisms to characterize and compensate for errors, while the long-term hope is that we will have a sufficient number of high-quality qubits to correct errors dynamically and sustain long-running, fault-tolerant quantum computations.

       Finally, Chapters 11 and 12 describe the computations that can be accomplished using qubits and gates, and the potential for applications beyond the capabilities of classical computers.

      Our hope is to lay a firm foundation for those new to the quantum computing field, whether students or practicing engineers, as a first step toward tackling the many research and engineering challenges that are needed to make large-scale quantum computers a reality.

      Exercises

       1.1 How many basis states are there for a three-qubit system? Show the vectors for the (computational) basis states.

       1.2 There are four Bell states that can be created by entangling two qubits. In addition to the state shown in Figure 1.5, the three additional states are listed below. Construct a circuit for generating each state.12(|00⟩−|11⟩)12(|01⟩+|10⟩)12(|01⟩−|10⟩)

       1.3 Prove the following equivalencies.HZH = XHXH = ZHYH=−YCNOT1,0=H⊗2CNOT0,1H⊗2 In (d), CNOTi,j means a CNOT with qubit i as the control and qubit j as the target. H⊗2 means a Hadamard gate applied to both qubits.

       1.4 Create a quantum circuit that swaps two qubit states. In other words: |ab⟩ ↦ |ba⟩. Hint: Consider this classical algorithm that swaps two numbers x and y using an exclusive-OR (XOR) instruction.

       1.5 Suppose we design a superconducting qubit where the energy difference between |0⟩ and |1⟩ is around 10 GHz. What is the temperature needed to minimize the effect of thermal energy on the qubit, assuming that the qubit is in thermal equilibrium with its environment?

       1.6 Consider the following three-qubit quantum state:Is qubit q2 entangled with the other two qubits? Explain why or why not.

       1.7 Suppose we have a way of measuring a qubit in the |+⟩ and |−⟩ basis. As a reminder:Given a qubit in the |0⟩ state, what is the probability of measuring |+⟩? (Hint: Use the Born Rule.)Given a qubit in the |1⟩ state, what is the probability of measuring |+⟩?Given a qubit |R⟩=12|0⟩+i2|1⟩, what is the probability of measuring |−⟩?

       1.8 Given a qubitWhat is the probability of measuring |0⟩?What is the probability of measuring |+⟩?What is the probability of measuring |−⟩?

      Notes

      1 1 To be more precise, |0⟩ and |1⟩ are known as the “computational basis” or “standard СКАЧАТЬ