Computational Modeling and Simulation Examples in Bioengineering. Группа авторов

Чтение книги онлайн.

СКАЧАТЬ limitation of the study is mirrored in the fact that authors assumed a rigid wall which may alter the results since ILT tissue can deform during a cardiac cycle and consequently influence the fluid dynamics and the distribution of chemicals.

1.7 Finite Element Procedure and Fluid–Structure Interaction

      Blood flow in aorta has a time‐dependent 3D flow, so the time‐dependent and full three‐dimensional Navier–Stokes equations were solved. The laminar flow condition appropriate for this type of analysis [107] was used. The finite element code was validated using the analytical solution for shear stress and velocities through the curved tube [108]. A penalty formulation will be used [109]. The incremental–iterative form of the equations for time step and equilibrium iteration “i” is:

      (1.1)

      The left upper index “t + Δt” denotes that the quantities are evaluated at the end of time step. The matrix M_v is mass matrix, K_vv and J_vv are convective matrices, K_μv is the viscous matrix, K_vp is the pressure matrix, and F_v and F_p are forcing vectors. The pressure is eliminated at the element level through the static condensation. For the penalty formulation, the incompressibility constraint is defined in the following manner:

      (1.2)

      where λ is a relatively large positive scalar so that p/λ is a small number (practically zero).

      1.7.1 Displacement Force Calculations

      Displacement force was calculated from direct integration of the pressure and wall shear stress distributions on the surfaces of the aortic wall:

       (1.3)

      where the integrals are surface finite elements along the surface of the aortic wall. Weight of blood in standing or supine position was also considered. It was assumed that all of the weight of the blood is supported by the endograft.

      1.7.2 Shear Stress Calculation

      At the regions of stasis and flow reversals, there is an important role of motion and deformation in the shear stress calculation [110, 111], concept of the rigid wall condition was assumed due to the negligible effect of shear stress on total DF [112]. The distribution of stresses within the blood was estimated. The stresses ^tσ_ij at time “t” is equal

      (1.4)

      where

(1.5)

is the viscous stress, ^tμ is viscosity corresponding to the velocity vector ^tv at a spatial point within the blood domain. The viscous stresses are represented by (1.5).

      The wall shear stress is calculated as:

      (1.6)

      where ^tv_t denotes the tangential velocity, and n is the normal direction at the vessel wall. At the integration points near the wall surface, the tangential velocity was estimated first, and then the velocity gradient ∂^tv_t/∂n was calculated. Finally, the viscosity coefficient ^tμ using the average velocity was evaluated. Blood was taken as an incompressible Newtonian fluid, appropriate for larger arteries [110]. The kinematic viscosity was ν = 3.5e−6 m²/s and the blood density was ρ = 1050 kg/m³.

      1.7.3 Modeling the Deformation of Blood Vessels

      In modeling blood flow in large blood vessels, we have recognized two distinct cases: (i) rigid walls and (ii) deformable walls. The assumption (i) is mostly adopted in practical applications. It is very important to determine the stress–strain state in tissue, when blood and blood vessel system is analyzed, as well as the effects of the wall deformation on the blood flow characteristics.

There are complex mechanical characteristics of blood vessel tissue. The tissue can be modeled from linear elastic to nonlinear viscoelastic model. The governing finite element equations used in modeling wall tissue deformation with emphasis on implementation of nonlinear constitutive models are summarized.

      If the principle of virtual work is applied, the differential equations of motion of a finite element are

(1.7)

      where the element matrices are: M is mass matrix; B^w is the damping matrix, in case when the material has a viscous resistance; K is the stiffness matrix; and F^ext is the external nodal force vector which includes body and surface forces acting on the element. The dynamic differential equations of motion by the СКАЧАТЬ