Inventions in the Century. Doolittle William Henry

Чтение книги онлайн.

СКАЧАТЬ in sections to give flexibility to the frame; collected in gangs to increase the extent of operation; made with disks instead of spikes, with which to cut the roots of weeds and separate the soil, instead of merely scratching them. A still later invention, curved spring teeth, has been found far superior to spikes or disks in throwing up, separating and pulverising the soil. A harrow comprising two ranks of oppositely curved trailing teeth is especially popular in some countries. These three distinct classes of harrows, the disk type, the curved spring tooth type, and gangs of sections of concavo-convex disks, particularly distinguish this class of implements from the old forms of previous ages.

      CHAPTER III.

      AGRICULTURAL IMPLEMENTS

      It is wonderful for how many generations men were contented to throw grain into the air as the Parable relates:

      "Behold, a sower went forth to sow, and when he sowed some seeds fell by the way side, and the fowls came and devoured them up: some fell on stony places where they had not much earth, and forthwith they sprung up, because they had no deepness of earth; and when the sun was up they were scorched; and because they had no root they withered away. And some fell among thorns and the thorns sprung up and choked them. But others fell into good ground and brought forth fruit, some a hundredfold, some sixtyfold, and some thirtyfold."

      Here are indicated the defects in depositing the seed that only the inventions of the century have fully corrected. The equal distribution of the seed and not its wide scattering, its sowing in regular drills or planting at intervals, at certain and uniform depths, the adaptation of devices to meet the variations in the land to be planted, and in short the substitution of quick, certain, positive mechanisms for the slow, uncertain, variable hand of man. Not only has the increase an hundredfold been obtained, but with the machines of to-day the sowing and planting of a hundredfold more land has been made possible, the employment of armies of men where idleness would have reigned, and the feeding of millions of people among whom hunger would otherwise have prevailed. Not only did this machinery not exist at the beginning of the century, but the agricultural machines and devices in this line of the character existing fifty years ago are now discarded as useless and worthless.

      It is true that, as in the case of the ploughs, attempts had been made through the centuries to invent and improve seeding implements. The Assyrians 500 years B. C. had in use a rude plough in which behind the sharp wooden plough point was fixed a bowl-shaped hopper through which seed was dropped into the furrow, and was covered by the falling back of the furrow upon it. The Chinese, probably before that time, had a wheelbarrow arrangement with a seed hopper and separate seed spouts. In India a drilling hopper had been attached to a plough. Italy claims the honour among European nations of first introducing a machine for sowing grain. It was invented about the beginning of the seventeenth century and is described by Zanon in his Work on Agriculture printed at Venice in 1764. It was a machine mounted on two wheels, that had a seed box in the bottom of which was a series of holes opening into a corresponding number of metal tubes or funnels. At their front these tubes at their lower ends were sharpened to make small furrows into which the seed dropped.

      Similar single machines were in the course of the seventeenth and eighteenth centuries devised in Austria and England. The one in Austria was invented by a Spaniard, one Don Joseph de Lescatello, tested in Luxembourg in 1662. The inventor was rewarded by the Emperor, recommended to the King of Spain, and in 1663 and 1664 his machines were made and sold at Madrid. The knowledge of this Spaniard's invention was made known in England in 1699 by the Earl of Sandwich and John Evelyn. Jethro Tull in England shortly after invented and introduced a combined system of drilling, ploughing and cultivating. He sowed different seeds from the same machine, and arranged that they might be covered at different depths. Tull's machines were much improved by James Cooke, a clergyman of Lancashire, England; and also in the last decade of the eighteenth century by Baldwin and Wells of Norfolk, England.

      Washington and others in America had also commenced to invent and experiment with seeding machines. But as before intimated, the nineteenth century found the great mass of farmers everywhere sowing their wheat and other grains by throwing them into the air by hand, to be met by the gusts of wind and blown into hollows and on ridges, on stones and thorny places, – requiring often a second and third repetition of the same tedious process.

      In 1878 Mr. Coffin, a distinguished journalist of Boston, in an address before the Patent Committee of the U. S. Senate, set forth the advantages obtained by the modern improvements in seeders as follows:

      "The seeder covers the soil to a uniform depth. It sows evenly, and sows a specific quantity. You may graduate it so that, after a little experience, you can determine the amount per acre even to a quart of wheat. They sow all kinds of grain, – wheat, clover, and superphosphate, if need be, at once. They harrow at the same time. They make the crop more certain. It is the united testimony of manufacturers and farmers alike that the crop is increased from one-eighth to one-fourth, especially in the winter wheat. Winter wheat, you are aware, in the freezing and thawing season, is apt to heave out. It is desirable to bury the seed a uniform and proper depth and to throw over the young plant such an amount of soil that it shall not heave with the freezing and thawing. Of the 360,000,000 bushels of wheat raised last year I suppose more than 300,000,000 was winter wheat. One-eighth of this is 37,700,000 bushels."

      It would seem to many that after the adoption of a seed hopper, and spouts with sharpened ends that cut the drill rows in the furrows and deposited the seed therein, that little was left to be done in this class of inventions; but a great many improvements were necessary. Gravity alone could not be depended upon for feeding the seed. Means had to be devised for a continuous and regular discharge from each grain tube; for varying the quantity of the seed fed by varying the escape openings, or by positive mechanical movements variable in speed; for fixing accurately the quantity of seed discharged; for changing the apparatus to feed coarse or fine seed; and for rendering the apparatus efficient on different surfaces – steep hillsides, level plains, irregular lands.

      An important step was the substitution of what is called the "force feed" for the gravity feed. There is a variety of devices for this purpose, the principle of one of them being a revolving feed wheel located beneath the hopper, and above each spout, the two casings between which the feed wheel revolves forming the outer walls of a complete measuring channel, or throat, through which the grain is carried by the rotary motion of the wheel, thus providing the means of measuring the seed with as much accuracy as could be done by a small measure. The quantity sown per acre is governed by simply increasing or diminishing the speed of the feed wheel. In one form of device this change of speed is altered by a system of cone gearing. A graduated flow of the seed has also been effected by the employment of a cylinder having a smooth and fluted part working in a cup beneath the hopper with provision for adjustment of the smooth part towards and from the fluted part to cut off or increase the flow.

      To avoid the use of a separate apparatus for separate sizes of grain and other seed, the seed holder has been divided into parts – one part for containing wheat, barley and other medium-sized grains, and another for corn, peas and the larger seeds. And as these parts are used on separate occasions, the respective apertures are opened or closed by a sliding bottom and by a single movement of the hand.

      Rubber tubes for conducting the seed through the hollow holes were introduced in place of the metal spouts that answered both as a spout and a hoe.

      In place of the common hoe drill of a form used in the early part of the century, the hoes being forced into the soil by the use of levers and weights, what are known as "shoe drills" have largely succeeded. A series of shoes are pivoted to the frame, extend beneath the seed box, and are provided with springs for depressing or raising them.

      All kinds of seeds and fertilisers, separately or together, may be now sown, and the broadcast sowing of a larger area than that covered by the throw of the hand can now be given by machinery.

      Corn and cotton seed are thus also planted, СКАЧАТЬ