The Smart Cyber Ecosystem for Sustainable Development. Группа авторов

Чтение книги онлайн.

      Figure 2.8 The transmission cycle of SU.

2.6.1 Sensing Methods

      The fundamental objective of sensing methods is to increase the positive detection probability and decrease the false detection probability of PUs. This leads to more protection of PUs and at the same time more utilization of the available spectrum. In this section, we present the main sensing methods. However, several other methods can be found in the literature.

2.7 ML for Wireless Networks: Challenges and Solution Approaches

      In previous sections, we discussed various topics about recent trends in network configuration, control, and management. We indicated recent trends in network architecture design in order to respond to the requirements of large-scale networks. Large-scale networks feature a significant increase in the number of users and smart technology-based systems that have become an integral part of human life, especially with the vast amount of software applications that require high speeds and fast real time response. In addition to that, different applications emerged in the last years to allow easy and high quality communication between people. Such applications have become an important tool used even by the largest media stations.

In the following sections, we review and discuss important challenges in wireless networking that can be better tackled, exploiting ML approaches. The application of ML in wireless networking aims at reducing human interaction and creating a self-driven network, that are able to optimize and configure themselves. We focus on recent published research and try to shed light on important research aspects of the present and future. Our goal is to assist readers to identify the scientific areas and specific issues that need further research and exploration. We divide the discussion into three parts. In the first part, we focus on Cellular networks, while the second part focuses on wireless local area networks (WLANs). The third part is devoted to cognitive radio networks.

      2.7.1 Cellular Networks

       2.7.1.1 Energy Saving

      With the steady increase in the number of users of wireless networks and the need to deploy large number of base stations, and since base stations consume large energy; operating the network with minimum energy is a challenge. One way to reduce energy consumption is the idea of turning off some base stations if users can be served from others, while maintaining a reasonable QoS level. Learning the operation of the network over time helps in improving decisions about which base stations might be switched off.

      An SDN-based ML system for energy saving is proposed in [15]. Performance of neural networks and SVM algorithms is compared. The network trains itself using data collected from base stations and recommends the operator time periods during which some base stations are predicted to handle very low traffic and therefore can be switched off.

      The authors of [16] propose a Q learning method for base station on-off switching. The switching of base stations is defined as the actions, while the traffic load is defined as the state. The overall objective is to minimize energy consumption. Policy values are used by the controller to decide on switching. After performing a switch operation, the system state is changed and the energy cost of the former state is computed. If the energy cost of the newly executed action is smaller than energy costs with other actions, then the controller updates the policy value in order to increase the probability of selecting this action. With time, the optimal switching mechanism is obtained.

       2.7.1.2 Channel Access and Assignment

      The effective use of wireless channels has become an urgent necessity, as many heterogeneous systems operate in the same frequency band. Thus, coexistence and organized access of the shared frequency chunks by systems are necessary. Consequently, any design of the wireless channel sharing mechanism should be based on a prediction of the behavior of networks users.

      In [17], the authors propose deep reinforcement ML-based MAC protocol for the coexistence of multiple heterogeneous networks. The method allows time-sharing access of the spectrum, by a series of observations and actions. The MAC protocol does not have to know the MAC mechanism of other networks and tries to maximize the throughput of all coexisting networks. The authors of [18] employ reinforcement learning for managing cell outage and compensation. The system state is constituted by the allocation of users to the resources of cells and the channel. Actions are related to the power control, while the rewards are quantified in terms of SINR improvement. The authors show that such ML-based approach provides improved performance.

In [19] and [20], the authors use clustering algorithms to group users that share common interests to reduce interference and collisions. The authors show that such clustering improves the access opportunities for wireless users. A cluster header (CH) is selected to collect data from all devices. It sends the data to base stations which schedule the transmission.

      Channel assignment is a well-known challenging issue in wireless networks, especially with systems of limited channels. Such systems highly suffer from interference, and the optimal selection of channels becomes important. Channel assignment problems are normally formulated as convex optimization problems, where algorithms needed to solve such problems are computationally СКАЧАТЬ