Finishing Techniques for Wood Crafters. Lora S. Irish
Чтение книги онлайн.
Читать онлайн книгу Finishing Techniques for Wood Crafters - Lora S. Irish страница 3
Название: Finishing Techniques for Wood Crafters
Автор: Lora S. Irish
Издательство: Ingram
Жанр: Сделай Сам
isbn: 9781607655015
isbn:
This fish was pre-treated with a reworkable fixative spray sealer.
Reworkable Fixative Spray Sealer
Many art media techniques need a fixative to seal one layer of work before applying additional layers of color. A reworkable fixative spray sealer does just that. It seals and protects the color work you have already done on the project, yet allows new color to be applied to its lightly textured surface. Reworkable sealers can also be used to pretreat a raw wood surface, acting similar to sanding sealer by hardening and strengthening the upper surface of the wood. By applying one light coat of reworkable spray sealer to raw wood, you can control how much color soaks into the wood with the first application of thinned and wash coat paints.
Water Wash
For very soft woods, such as basswood or poplar, just a few light coats of water can pre-moisten a carving enough to allow acrylic or craft paints to flow smoothly onto the surface of the carving.
Acrylic Wash
Acrylic paints can be thinned with water, in at least a one-to-one ratio, to create an acrylic wash pre-treatment. Such washes allow you to blend and mix several colors or tones on the wood to create a base coat for a painting.
This dragon was painted starting with a multicolored acrylic wash.
Oil and Turpentine Coating
Mixing boiled linseed oil with turpentine at a one-to-one ratio makes a wonderful pre-treatment that allows the wood grain to show through the paint. This oil mix is often a pre-treatment base for dry brushing both acrylics and oil paints.
Spray or Brush-On Sealer
There is a wide variety of spray and brush-on finishes that can be used to seal wood before applying color. Matte and semi-matte sealers work best because they have a small amount of texture that captures and holds the layers of paint, as opposed to super-smooth gloss sealers. Spray and brush-on sealers are most often used as the finishing coat, meant to be the last layer of work in your color application, as they completely seal the wood surface and repel water, oil, and new layers of paint from penetrating into the wood. However, when you want to slowly build up layers of transparent colors, such as when oil rouging for skin tones (see page), one light coating of a spray or brush-on sealer sets the color layer below it and provides a slick, smooth surface for the new layer of coloring.
Primers
A primer is an acrylic base coat that is applied over the raw wood before the individual colors are painted. Primer blocks out the wood grain so that the paints take on a bright, clean appearance. There are pre-mixed primers available that have little or no shine, which allows the paint to adhere well. However, most pre-mixed primers are pure white and have a gritty finish. If you are using a pre-mixed primer, thin it on a palette with 2 parts primer to 1 part water.
You can also create your own primer using the paints you have on hand, which is what I prefer to do. I usually thin my primer with several drops of water added to a quarter-sized puddle of primer on the palette. The extra water in the mix slows the drying rate of the paint to give you extra time to smooth out each brushful of color. The colors you will be using on your project determine what color of primer you should use, which is another reason to use your own paints as primers. Here is a breakdown of some primer color options and when to use them.
White primers work very well for pale and pastel colors and for white areas.
If an area will be red, orange, purple, bright green, or bright blue, you can use a pale gray primer. Because red and orange are pure hues, they contain no white, black, or gray coloration. This means they are semi-transparent, allowing some light to show through thin coats. A gray primer blocks the light and makes the color appear much more opaque.
Gray primer
Medium brown primer
Mustard yellow, tan, and medium brown primers work well for yellows, medium and dull greens, orange, rust, teal, and skin tones.
Blended color primer
For some projects, you may want a primer coat made up of several blended colors. For example, you can place a small amount of golden yellow, tan, and medium brown on your palette. As you apply the primer coat, you can randomly pick up a little color from each color puddle. The colors will blend as you brush them onto the wood, giving the primer a mottled effect. As shown in the marbleizing technique (page) and the wood grain technique (page), using a mottled or blended primer adds to the mottled, textured appearance of the color coats. If your final color application will be an uneven, blended coloring, try using a blended primer as your base coat.
Final Finishes
Once a project is complete, you may want to give all raw wood, burned wood, and painted surfaces a final sealer or finishing coat to protect them from the environment and from UV rays. As we work through the techniques and projects in this book, we will see several options for final finishes you can use. They can include boiled linseed oil (BLO) mixed with turpentine, Tung oil or Danish oil, spray or brush-on polyurethane sealer, brush-on acrylic sealer, a rub and buff wax finish, and hand buffing with a soft cloth. Here is a brief summary of each finish, followed by more details about each one.
• Acrylic Sealer: A soft polymer sealer, acrylic sealer is available in multiple sheens from dull matte to high gloss, dries quickly, dries crystal clear, and does not change or affect the color of the wood or paint. Use on decorative, highly detailed painted projects.
• Paste Wax: This is easy to apply, leaves a non-slick finish, seals the wood surface without leaving a plastic or oil feel, and can be reapplied over the lifetime of the piece. Use on any project that will be handled, held, or gripped.
• Hand Buffing: Some coloring agents like watercolors, pastels, and colored pencils do need a finishing layer or sealer applied to the project to protect the colors from damage or moving. Oil paints, which penetrate into the wood fibers, and acrylic paints, which are polymer-based, do not require a protective sealing layer, as they create their own semi-hard, durable, dirt-resistant finish. To strengthen that self-sealing surface, however, you can buff the painted surface with a dry, clean cloth after the paint is thoroughly dried. Buffing acts like a polishing process, leaving the painted surface with a soft sheen and smooth feel. If you want to avoid excess use of oils or chemicals, or just want a vintage look, try hand buffing.
• Boiled Linseed Oil: This works as a pre-treatment that can be covered with other sealers, infuses the wood deeply with the oil, prevents the СКАЧАТЬ