Dynamic Spectrum Access Decisions. George F. Elmasry
Чтение книги онлайн.
Читать онлайн книгу Dynamic Spectrum Access Decisions - George F. Elmasry страница 40
Название: Dynamic Spectrum Access Decisions
Автор: George F. Elmasry
Издательство: John Wiley & Sons Limited
Жанр: Отраслевые издания
isbn: 9781119573791
isbn:
Figure 4.2 Local decision fusion based on single‐dimensional knowledge base.5
Notice that to obtain such knowledge repository, the sensor has to have some sort of pre‐knowledge of the sensed signal characteristics. As explained earlier in this book, this can be achieved in both the case of same‐channel in‐band sensing and the case of an augmented sensor sensing the presence of a primary user signal with known cyclostationary characteristics. In the case of same‐channel in‐band sensing, signal marks allow for the differentiation between energy samples representing noise or noise plus interfering signal (left side of the decision threshold in Figure 4.2) and energy samples representing signal plus noise or signal plus noise plus interfering signal (right side of the decision threshold in Figure 4.2).3 In the case of an augmented sensor probing a frequency band for potential use, the signal cyclostationary characteristics will allow the sensor to collect energy samples representing noise (left side of the decision threshold in Figure 4.2) and energy samples representing signal plus noise (right side of the decision threshold in Figure 4.2).
As scenarios 2 and 3 in Figure 4.2 show, when the noise power increases, the RSSI samples will tend to spread wider. Noise power can be due to pure AWGN or another secondary user overlaying its signal that has unknown characteristics. As scenario 3 in Figure 4.2 shows, a higher noise power will lead to the right side points and the left side points to encroach on each other. Note that higher noise power increases the standard deviation of the detected noise energy samples and the detected signal plus noise energy samples. With this case, the local decision fusion engine is able to hypothesize the presence or absence of a communications signal but clearly noise power increase can lead to either a higher probability of false alarm or a higher probability of misdetection depending on where the decision threshold is chosen.
Now let us consider the case when the local decision fusion engine is able to create a more accurate energy detection fusion, as illustrated in Figure 4.3. With this case the knowledge repository can plot a two‐dimensional curve of RSSI versus SNIR. The inclusion of SNIR in the knowledge repository adds a better depiction and more accurate hypothesizing as the increase in noise energy can cause spreading of the plotted points in two dimensions instead of one dimension. This will result in false alarm and misdetection hypotheses only in extreme cases such as the presence of very high noise power.
Figure 4.3 Decision fusion based on two‐dimensional knowledge base.
This example is used to illustrate the importance of coordinating between decision fusion hierarchies. If the local decision fusion follows the approach depicted in Figure 4.2 to reduce computational complexity, the distributed or centralized decision fusion may need to create knowledge repositories equivalent to Figure 4.3 to reduce false alarm and misdetection probabilities. On the other hand, if the local decision fusion engine was able to hypothesize based on Figure 4.3, distributed and centralized decision fusion engines can focus on other DSA aspects, such as spatial location of interference and the creation of a more accurate spectrum utilization map.
The trade space in Figure 4.1 illustrates some important aspects. In reality, there are more aspects in this trade space. For example, having a more detailed knowledge repository at the local node may not be achievable because of processing and power limitations.4,20 At a centralized arbitrator, processing power may not be a limiting factor. On the other hand, sending more detailed spectrum sensing information to a centralized arbitrator can have its own drawbacks to include the use of more bandwidth for DSA control traffic.
Relying on the centralized arbitrator for more decision fusion can result in the loss of information when sensing information is fused locally. For example, local fusion of SNIR values may produce information about SNIR that includes the mean, average, and standard deviation out of a large sample of SNIR values. This processing can result in some information loss and may result in the centralized arbitrator failing to achieve the desired lower probability of false alarm or lower probability of misdetection. Local fusion using raw RSSI and SNIR values can have a more accurate cutoff threshold in Figure 4.3.
A designer of a hybrid DSA system has to consider the trade space taking into consideration all the factors that can affect the final solution to include bandwidth limitations, hardware limitation such as SWaP and processing power, speed and accuracy of decision making, and the system's requirements. One important factor that can affect hybrid design is the role of other cognitive processes in the cognitive wireless network nodes. These cognitive processes can influence the design of DSA decision fusion as detailed in the next section. Keep in mind that DSA capabilities are one of many aspects of wireless cognitive networking capabilities.
4.3 The Role of Other Cognitive Processes
Let us illustrate this critical factor with the case of a distributed cooperative directional MANET that is designed to route around jammed areas. The design of such a system has to feed the results of the DSA decision fusion to a cognitive routing process/engine and the cognitive routing engine has to use DSA information to create reactive directional routes relying on directional antennas. The cognitive routing engine has different objectives, including:
1 creating directional routes that allow communications around compromised areas
2 increasing spectrum reuse
3 reducing interference between the directional MANET nodes.
This type of cognitive routing relies on controlling the RF beam's direction and power to achieve these objectives while obtaining spectrum sensing information from a distributed cooperative spectrum decision fusion engine (see Figure 4.4). Some of the characteristics of a distributed cognitive routing engine that relate to a distributed cognitive DSA engine include the following:
The cognitive routing engine may need to control transmitting power based on the receiving node location. This is needed to reduce the impact of СКАЧАТЬ