MCSA Windows Server 2012 R2 Complete Study Guide. Panek William

Чтение книги онлайн.

СКАЧАТЬ Convert To Dynamic Disk dialog box changes to the Disks To Convert dialog box and shows the disk/disks that will be converted to dynamic disks.

      7. Click Convert.

      8. Disk Management will warn that if you convert the disk to dynamic, you will not be able to start the installed operating system from any volume on the disk (except the current boot volume). Click Yes.

      9. Close Computer Management.

      The converted disk will now show as Dynamic in Disk Management.

      Managing Volumes

      A volume set is created from volumes that span multiple drives by using the free space from those drives to construct what will appear to be a single drive. The following list includes the various types of volume sets and their definitions:

      ■ Simple volume uses only one disk or a portion of a disk.

      ■ Spanned volume is a simple volume that spans multiple disks, with a maximum of 32. Use a spanned volume if the volume needs are too great for a single disk.

      ■ Striped volume stores data in stripes across two or more disks. A striped volume gives you fast access to data but is not fault tolerant, nor can it be extended or mirrored. If one disk in the striped set fails, the entire volume fails.

      ■ Mirrored volume duplicates data across two disks. This type of volume is fault tolerant because if one drive fails, the data on the other disk is unaffected.

      ■ RAID-5 volume stores data in stripes across three or more disks. This type of volume is fault tolerant because if a drive fails, the data can be re-created from the parity off of the remaining disk drives. Operating system files and boot files cannot reside on the RAID-5 disks.

Exercise 1.5 illustrates the procedure for creating a volume set.

EXERCISE 1.5: Creating a Volume Set

      1. Open Computer Management under Administrative Tools.

      2. Select Disk Management.

      3. Select and right-click a disk that has unallocated space. If there are no disk drives available for a particular volume set, that volume set will be grayed out as a selectable option. In this exercise, you’ll choose a spanned volume set, but the process after the volume set selection is the same regardless of which kind you choose. The only thing that differs is the number of disk drives chosen.

      4. The Welcome page of the New Spanned Volume Wizard appears and explains the type of volume set chosen. Click Next.

      5. The Select Disks page appears. Select the disk that will be included with the volume set and click Add. Repeat this process until all of the desired disks have been added. Click Next.

      6. The Assign Drive Letter Or Path page appears. From here you can select the desired drive letter for the volume, mount the volume in an empty NTFS folder, or choose not to assign a drive letter. The new volume is labeled as E. Click Next.

      7. The Format Volume page appears. Choose to format the new volume. Click Next.

      8. Click Finish.

      9. If the disks have not been converted to dynamic, you will be asked to convert the disks. Click Yes.

      The new volume will appear as a healthy spanned dynamic volume with the new available disk space of the new volume set.

      Storage Spaces in Windows Server 2012 R2

      Windows Server 2012 R2 includes a technology called Storage Spaces. Windows Server 2012 R2 allows an administrator to virtualize storage by grouping disks into storage pools. These storage pools can then be turned into virtual disks called storage spaces.

      The Storage Spaces technology allows an administrator to have a highly available, scalable, low-cost, and flexible solution for both physical and virtual installations. Storage Spaces allows you to set up this advantage on either a single server or in scalable multinode mode. So, before going any further, let’s look at these two terms that you must understand.

      Storage Pools Storage pools are a group of physical disks that allows an administrator to delegate administration, expand disk sizes, and group disks together.

      Storage Spaces Storage spaces allow an administrator to take free space from storage pools and create virtual disks called storage spaces. Storage spaces give administrators the ability to have precise control, resiliency, and storage tiers.

      Storage spaces and storage pools can be managed by an administrator through the use of the Windows Storage Management API, Server Manager, or Windows PowerShell.

      One of the advantages of using the Storage Spaces technology is the ability to set up resiliency. There are three types of Storage Space resiliency: mirror, parity, and simple (no resiliency).

       Fault tolerance (RAID) is discussed in detail in the “Redundant Array of Independent Disks” section.

      Now that you understand what storage spaces and storage pools do, let’s take a look at some of the other advantages of using these features in Windows Server 2012 R2.

      Availability One advantage to the Storage Spaces technology is the ability to fully integrate the storage space with failover clustering. This advantage allows administrators to achieve service deployments that are continuously available. Administrators have the ability to set up storage pools to be clustered across multiple nodes within a single cluster.

      Tiered Storage The Storage Spaces technology allows virtual disks to be created with a two-tier storage setup. For data that is used often, you have an SSD tier; for data that is not used often, you use an HDD tier. The Storage Spaces technology will automatically transfer data at a subfile level between the two different tiers based on how often the data is used. Because of tiered storage, performance is greatly increased for data that is used most often, and data that is not used often still gets the advantage of being stored on a low-cost storage option.

      Delegation One advantage of using storage pools is that administrators have the ability to control access by using access control lists (ACLs). What is nice about this advantage is that each storage pool can have its own unique access control lists. Storage pools are fully integrated with Active Directory Domain Services.

      Redundant Array of Independent Disks

      The ability to support drive sets and arrays using Redundant Array of Independent Disks (RAID) technology is built into Windows Server 2012 R2. RAID can be used to enhance data performance, or it can be used to provide fault tolerance to maintain data integrity in case of a hard disk failure. Windows Server 2012 R2 supports three types of RAID technologies: RAID-0, RAID-1, and RAID-5.

      RAID-0 (Disk Striping) Disk striping is using two or more volumes on independent disks created as a single striped set. There can be a maximum of 32 disks. In a striped set, data is divided into blocks that are distributed sequentially across all of the drives in the set. With RAID-0 disk striping, you get very fast read and write performance because multiple blocks of data can be accessed from multiple drives simultaneously. However, RAID-0 does not offer the ability to maintain data integrity СКАЧАТЬ