Introduction to the World of Physics. Методическое пособие по переводу научно-технических текстов. Лидия Страутман

Чтение книги онлайн.

      Emergence- появление

      customary units- обычные единицы

      to adopt- принять

      remain- остаться

      gallon- галлон

      despite – несмотря на

      imperial fluid ounce- имперская жидкая унция

      inch-дюйм, дюймовый, медленно двигаться

      Before were widely adopted around the world, the British systems of English units and later Imperial units were used in Britain, the Commonwealth and the United States. The system came to be known as U.S. customary units in the United States and is still in use there and in a few countries. These various systems of measurement have at times been called foot-pound-second systems after the Imperial units for distance, weight and time. Many Imperial units remain in use in Britain despite the fact that it has officially switched to the SI system. Road signs are still in miles, yards, miles per hour, and so on, people tend to measure their own height in feet and inches and milk is sold in pints, to give just a few examples. Imperial units are used in many other places, for example, in many Commonwealth countries that are considered metricated, land area is measured in acres and floor space in square feet, particularly for commercial transactions (rather than government statistics). Similarly, the imperial gallon is used in many countries that are considered metricated at gas/petrol stations, an example being the .

      The is a system of measurement used in most of the . It is also called the International System of Units, or .

      British imperial Units

      Imperial units were defined in the United Kingdom in 1825. Imperial units were used in countries that were part of the . While many of these countries, including the United Kingdom, have officially adopted SI, the older system of units is still used

      US customary units are the official units used in the US. These are similar to the British imperial units and are also based on the units used in the United Kingdom from before . But some of the units are different to the British ones. For example, there are 20 imperial fluid ounces in an imperial pint, but 16 US fluid ounces in a US pint. Additionally, the US fluid ounce is slightly bigger than the imperial fluid ounce. The result is that US pints and gallons are smaller than imperial pints and gallons. In the United States, the metric system has been legal for trade since 1866 but other measurements such as the gallon, inch, and the pound are still widely used.

      SI Units are the most widely used system of units. They are the most common system for everyday in the world, and are almost universally used in the realm of science. The name derives from the French phrase, Système International d'Unités, or in English International System of Units. The system consists of a set of seven base units together with a set of prefixes from which all other units are derived.

      The emergence of an internationally recognized system of units at a time of increasing international cooperation and trade is highly significant. It has provided a necessary common base for the scientific, technical, and industrial exchange that has fostered a growing consciousness of the need to approach issues from a .

      The was officially adopted in after the . During the history of the metric system, a number of variations have evolved and their use spread around the world replacing many traditional measurement systems.

      By the end of a number of different systems of measurement were still in use throughout the world. Some of these systems were metric system variations while others were based on the Imperial and American systems. It was recognized that additional steps were needed to promote a worldwide measurement system. As a result, the 9th General Conference on Weights and Measures (CGPM) in 1948, asked the International Committee for Weights and Measures (CIPM) to conduct an international study of the measurement needs of the scientific, technical, and educational communities.

      Based on the findings of this study, the 10th CGPM in 1954 decided that an international system should be derived from six base units to provide for the measurement of temperature and optical radiation in addition to mechanical and electromagnetic quantities. The six base units recommended were the , , , ampere, (later renamed kelvin), and the candela. In 1960, the 11th CGPM named the system the International System of Units. The seventh base unit, the mole, was added in 1970 by the 14th CGPM.

      SI units are still sometimes referred to as the , especially in the United States, whose population has not widely adopted it, and in the , where conversion is only partial. SI units are a specific canon of measurements derived and extended from the Metric system; however, not all metric units of measurement are accepted as SI units. This international system of units is now either obligatory or permissible throughout the world. It is administered by the standards organization: the Bureau International des Poids et Mesures (International Bureau of Weights and Measures, BIPM).

      Length

      The most important unit is length: one was originally defined to be equal to 1/10,000,000^th of the distance from the pole to the along the meridian through . (Prior discussions had often suggested the length of a seconds pendulum in some standard gravity, which would have been only slightly shorter, and perhaps easier to determine.) This is approximately 10 percent longer than one yard. Later on, a rod with a rigid, X-shaped cross section was produced to serve as the easy-to-check standard for one meter's length. Due to the difficulty of actually measuring the length of a meridian quadrant in the eighteenth century, the first platinum prototype was short by 0.2 millimeters. More recently, the meter was redefined as a certain multiple of a specific radiation wavelength, and currently it is defined as the distance traveled by light in a vacuum in a specific period of time. Attempts to relate an integer multiple of the meter to any meridian have been abandoned.

      Mass

      The original base unit of mass in the metric system was the gram, chosen to match the mass of one cubic centimeter of water. For practical reasons, the reference standard that was deposited at the Archives de la république on June 22, 1799, was a kilogram (a cylinder of ). One kilogram is about 2.2 pounds. In 1889, the first General Conference on Weights and Measures (CGPM) sanctioned a replacement prototype, a cylinder of a 90 percent platinum, СКАЧАТЬ