DRBD-Cookbook. Joerg Christian Seubert

Чтение книги онлайн.

      1 Introduction

      If you want to build a cluster, sooner or later you face the problem that the data must be usable on all participating servers. This problem can be solved by transporting the data once per minute from the active cluster node to the passive cluster node.

      But what, if this "copy job" takes longer than one minute?

      In this case, you either have the situation that the copy jobs overtake each other and never end, because the cluster node in question does nothing else but ’copy’ - and ’nothing else’ means ’nothing else’ - or the data is outdated every time.

      Neither makes sense and is not desirable.

      If you have the additional situation that all cluster nodes must not only read the data but also write it, ’practical copying’ no longer makes any sense at all. Usually, this problem is solved by using a SAN or NAS.

      For a data center, where there are usually more than two machines running at 24 * 7 uptime, it may not be a problem to run one more machine per cluster group - this can be a ’disk pot’, known as a true SAN (storage area network), or it can be a network file server, known as a NAS (network-attached-storage).

      However, small businesses and home users face the problem of having to pay for a SAN or NAS.

      That’s where the DRBD - Distributed Replicated Block Device - product from LinBit (www.linbit.com) comes in. DRBD gives you the ability to connect two or more cluster nodes together without using a SAN or NAS as a data device. DRBD runs like a local RAID controller creating a mirror device (RAID 1) - but with "local disks" connected by a LAN. You can also use this variant in a large data center if your cluster needs to be independent of a SAN or NAS. For example, you can think of a monitoring server that monitors the SAN or NAS and has to run highly available, especially when the SAN or NAS is not running. This cookbook teaches the basics of a DRBD active-passive cluster, extended by further possibilities (three-node cluster, backbone LAN, deployment of DRBD on a Veritas cluster, creation of an own cluster via PERL, cluster configuration via hardware systems and many more) and demonstrates the procedures in the form of ’listings’. All examples are based on a test configuration with OpenSuSE Leap 15.1 (except 6.1.1) and can - with the necessary background knowledge - also be implemented in other Linux distributions. In the text number 6.1.1 the listing is done with SLES 11 SP 4 to show the commands and screen outputs of DRBD version 8 compared to DRBD version 9 because there are some differences. For using DRBD on Windows-Servers use chapter 12.