Thermal Food Engineering Operations. NITIN KUMAR

Чтение книги онлайн.

СКАЧАТЬ

      In the circuit, the triode valve assists the oscillations produced, and the potentiometer adjusts the output power. The galvanometer shows the supply of incident power as well as reflected power in the generator [79].

       1.3.3.2 Advantages and Disadvantages

      Advantages:

      1 Suitable for large and thick foods

      2 The investment cost is less or Low maintenance costs

      3 Easy to control and understand [59]

      4 Improves the level of the moisture

      5 RF is energy efficient

      6 Over dehydration and heating is prevented on the surfaces

      7 The shortcomings faced in energy or heat transfer controlled using

      8 shorter process lines [79]

      9 Increased throughput

      10 Simpler construction [54]

Disadvantages:

      1 Risk of arching

      2 The frequency band is narrow

      3 Occupy large floor space [59]

      4 The high initial capital cost of equipment and operating cost

      5 Fluctuations in electrical costs

      6 Different designs and applicators required to meet product-specific requirements [79]

      7 Reduced power density [54]

      Using a good quality of applicator’s design with specific fine-tuning, technologically advanced tools and highly skilled technicians sums up to be an efficient RF system.

      An exemplary RF system would have greater penetration depth, the volumetric heating advantage of dielectric heating than other techniques, along the hybrid systems produce effectual, swift, and graded results [79].

       1.3.3.3 Applications

      RF dielectric has various applications in lumber, textile, and food industries, etc.

      RF treatment is giving after the biscuits baked in cereals, to dry foods (herbs, spices, vegetables, potato products, pasta products), thawing, etc. The efficient role of RF is seen in moisture removal during the baking process.

      It is also used for the thawing of meats and fish in large amounts, and its volumetric nature enhances the acceleration in the process without affecting the distribution of temperature throughout the product [54].

      1 i) RF application in Fresh food processing:In Fresh fruits: A significant reduction in brown rot was seen when dielectric treatment (27.12MHz, 15kW) was given with hot water. Infection in peaches being reduced using RF heating and brown rots controlled in nectarines. In Fresh Vegetables: Vacuum-packaged Caixin (a green leafy vegetable) with an adequate microbial count resulted in a significant decrease in the number using ohmic heating with a 20 mm gap in electrode without affecting any other property of the material [26].

      2 ii) RF heating on fresh meats showed results when treated while meat processing, as reduced E. coli count, shelf life extension wherein it has higher heating uniformity and had a shorter cooking time [31, 75].

      3 iii) Significant reduction of A. parasiticus in corns seen using a combination of RF heating with hot air [25, 26].

      4 iv) RF heating system in food industries used to inactivate bacteria in wheat flour, caixin, peach, pepper spice, apple juice, stone fruit, almonds, ham, etc., using free-running or 50Ω type system at a frequency of 27.12MHz [31].

      5 v) It also used for disinfestation of rice, lentils, legumes, walnuts, etc., using a free-running oscillator at a frequency of 27.12MHz [31].

      6 vi) Also used in cooking purposes in beef, egg white, meat emulsion, pork ham, turkey, meat, etc., using free running or 50 ohms at a frequency of 27.12MHz.

      7 vii) Used in the thawing of pork, tuna fish, beef using 50 ohms at a frequency of 13.56-27.12MHz [31].

      8 viii) For enzyme inactivation in miso paste, apple, myrosinase using 50 ohms at 27.12MHz frequency.

      9 ix) Application in roasting and drying of nuts as well for improving energy efficiency and product quality [31].

      10 x) Dry-blanching with RF was observed to be an efficient method to treat products in which a 95% reduction in enzyme activity (POD) was seen in 3-7 min. time with a gap of 8-8.6 cm; rehydration enhancement, retention of the textural properties were also recorded [24].

      11 xi) Application in wood drying (10-30MHz), agricultural product drying (27MHz), food drying, etc. [79].

      12 xii) Production of Biodiesel from moist microalgae: Cell disruption of Algae done using RF heater at a frequency of 27.12MHz and maximum power output of 6kW and the esterification/transesterification reactions were also promoted [48].

      1.3.4 Ohmic Heating

       1.3.4.1 Principal and Mechanism

Heating technology has observed some recent advances with the following technology development, viz Dielectric heating (Radiofrequency and microwaves), induction and Ohmic heating. Ohmic Heating or joule heating is electro-heating, or electroconductive heating or direct electric resistance heating in which heat generated within the food material is due to the generation of alternating electric current passed through the food material. In 1900, the Ohmic heating technique was utilized for the Pasteurization of infant milk. In the early twentieth century, the electro-pure process was relevant commercially, but later with time, it became prevalent during the 1980s.

      The food itself acts conductor in electric resistance heating as the voltages are applied, the current between the electrode and ground helps in determining the resistivity of the food as per Ohm’s law. Increasing the current or voltage, thereby increase in temperature increases the conductivity of foods [54].

In Ohmic heating, unlike other thermal methods, the electrode is in contact with food; less frequency is applied compared to the frequency of radio or microwaves, and the waveform is usually a sine wave. Resistance heating systems help with the production of products with high storage stability through proper maintenance of food in terms of color and nutritional value [34]. Figure 1.2 depicts the circuit diagram of static (batch type) resistance heating process [46].

      Ohmic heating is defined as the amount of heat generated in which electrical current passes through the food and current resisting the flow of electricity. Its principle is based on the direct application of Ohm’s Law, wherein, the current through the conductor between the two points is directly proportional to the voltage.

Figure 1.2 Circuit СКАЧАТЬ