Electronics All-in-One For Dummies. Doug Lowe
Чтение книги онлайн.
Читать онлайн книгу Electronics All-in-One For Dummies - Doug Lowe страница 39
Название: Electronics All-in-One For Dummies
Автор: Doug Lowe
Издательство: John Wiley & Sons Limited
Жанр: Отраслевые издания
isbn: 9781119822134
isbn:
Representing Integrated Circuits in a Schematic Diagram
One important symbol that isn’t shown in Table 5-1 is the symbol for an IC (integrated circuit). ICs are small assemblies that usually have multiple leads, called pins, which connect to various parts of the circuit contained within the assembly. Some ICs have as few as six or eight pins; others have dozens or even hundreds. These pins are numbered, beginning with pin 1. Each pin in an IC has a distinct purpose, so connecting to the correct pins in your circuit is vital to the circuit’s proper operation. If you connect to the wrong pins, your circuit won’t work, and you may damage the IC.
The most common way to depict an integrated circuit in a schematic diagram is as a simple rectangle with leads coming out of it to depict the various pins. The arrangement of the pins in the schematic diagram doesn’t necessarily correspond to the physical arrangement of pins on the IC itself. Instead, the pins are positioned to provide for the simplest circuit paths in the diagram. The pins in the diagram are numbered to indicate the correct pin to use.
For example, Figure 5-8 shows a schematic diagram that uses a popular IC called a 555 timer IC to make an LED flash. The 555 has eight pins, and you can see that the schematic calls for connections on all eight. However, the pins in the diagram are arranged in a manner that simplifies the connections to be made to the pins. In an actual 555 IC, the pins are arranged in numerical order on either side of the IC, with pins 1 through 4 on one side and pins 5 through 8 on the other side.
FIGURE 5-8: A circuit that uses an integrated circuit.
Chapter 6
Building Projects
IN THIS CHAPTER
Yogi Berra is alleged to have said, “In theory, there is no difference between theory and practice. But in practice, there is.”
Much of this book is theoretical — how electric current works, how individual electronic components like resistors, capacitors, and transistors work, how digital logic works, and so on.
But the heart of electronics is building things. The reason for learning all the theory is so that you can practice the art by actually building circuits and putting them to use.
Throughout this book, I back up theoretical explanations about how various types of electronic components work with simple construction projects you can build to demonstrate the theory in actual use. In this chapter, you learn the basic construction techniques needed to build these projects.
Specifically, you learn how to create a prototype of a circuit using a handy device called a solderless breadboard. Then, you learn several techniques for creating a more permanent version of the circuit, in which the components and all the circuit’s interconnections are soldered together on a circuit board. Finally, you learn how to enclose your circuit board in a project box or other enclosure.
In this chapter, I walk you through the process of building a fairly sophisticated electronics project. Although you’re welcome to do so if you wish, I don’t expect you to actually build the project as you read this chapter. Instead, I simply want you to gain an appreciation for the process of building a nontrivial project from start to finish.
Looking at the Process of Building an Electronic Project
Electronic projects such as the ones you learn about in this book typically follow this predictable sequence of general steps from start to finish:
1 Decide what you want to build.Before you can design or build an electronic project, you must have a solid idea in mind for what you expect the project to do, what you want it to look like, and how human beings will interact with it.
2 Design the circuit.After you’ve settled on what you want to build, you need to design an electronic circuit that gets the job done. The end result of this step is a schematic diagram.
3 Build a prototype.Before you invest the time and materials needed to build a permanent circuit, it’s a good idea to first build a prototype, which lets you quickly test the circuit to make sure it works. Usually, you build the prototype on a solderless breadboard.
4 Build a permanent circuit.When your prototype is working, you can build a permanent version of the circuit. Usually, you build the permanent version by soldering components onto a printed circuit board.
5 Finish the project.To finish the project, you mount the circuit board along with any other necessary components such as batteries, switches, or light-emitting diodes in a suitable enclosure.
The remaining sections in this chapter describe each of these steps in greater detail.
Envisioning Your Project
Before you get lost in the details of designing and building your project, you should step back and look at the big СКАЧАТЬ