Advanced Antenna Array Engineering for 6G and Beyond Wireless Communications. Richard W. Ziolkowski
Чтение книги онлайн.
Читать онлайн книгу Advanced Antenna Array Engineering for 6G and Beyond Wireless Communications - Richard W. Ziolkowski страница 14
Название: Advanced Antenna Array Engineering for 6G and Beyond Wireless Communications
Автор: Richard W. Ziolkowski
Издательство: John Wiley & Sons Limited
Жанр: Техническая литература
isbn: 9781119712923
isbn:
Figure 1.5 Hybrid antenna arrays. (a) The basic architectures of transmitter and receiver systems. (b) Two types of array configurations for uniform square hybrid arrays: interleaved (upper) and localized (bottom). Each square represents an antenna element and squares with the same color represent antenna elements in the same analog subarray.
Source: From [12] / with permission of IEEE.
Signals in the analog subarray and in the digital processor can be processed in different domains and in different ways. A signal in each subarray can be simply weighted in the analog domain mainly for the purpose of achieving array gain and beam steering. The signal for each antenna element in a subarray can be varied in both its magnitude and phase, typically with limited resolution. In the simplest case, only a phase shifter is applied and the signal is weighted by a discrete phase shift value from a quantized set of values. The size of the set is typically represented by the number of quantized bits. For example, a 3‐bit quantization means eight discrete values are uniformly distributed over the angular interval [−π, π]. In the digital processor, signals from/to all of the subarrays are jointly processed. Advanced techniques which are similar to those utilized in conventional MIMO systems, such as spatial precoding/decoding, can be implemented.
Antenna elements in a hybrid array can be configured in various ways to form different topologies. Each of them has respective advantages and disadvantages. A configuration is typically fixed at the fabrication stage. The typical two types of regular configurations are interleaved and localized arrays. They are illustrated in Figure 1.5b for a 16 × 4 uniform square hybrid array. The antenna elements in each subarray in an interleaved array are distributed uniformly over the whole array. On the other hand, they are adjacent to each other in a localized array.
The analog subarrays in Figure 1.5 can be implemented in four different configurations depending on where the phase shifters are placed for beamforming. They are illustrated in Figure 1.6. Figure 1.6a shows the conventional phased array architecture for a receive analog array. Only the phase shifters and antennas are independent; all of the rest of its components are shared by all elements in each analog subarray. This passive power combining architecture incurs losses in the phase shifters and power combiners which increase with the number of antenna elements and operating frequency. These power losses could make large passive arrays impractical. A modification of this architecture is shown in Figure 1.6b. An individual LNA is applied to each antenna element before the phase shifter. This modification reduces the noise significantly and provides increased receiver sensitivity. This architecture can be implemented using either a shared frequency converter (with individual RF chains combined at the input to the mixer) or individual frequency conversion and combining in the IF unit. Figures 1.6c and 1.6d depict more advanced configurations in which the phase shift is implemented in the IF unit and local oscillator (LO) circuits, respectively.
Figure 1.6 Options for implementing analog subarrays. The blocks φ and α denote a variable phase shifter and magnitude attenuator, respectively. Blocks in green represent those able to be shared by the antenna elements in a subarray. The circle with a cross in it denotes where signals from individual antenna elements are combined to be delivered to the shared components. The subfigures show the four main options. (a) Phase shifter at the RF element before an LNA. (b) Phase shifter at the RF element after an LNA. (c) Phase shifter at the IF unit. (d) Phase shifter at the LO unit.
It must be noted that commercial 6‐bit digital phase shifter mm‐wave integrated circuits (MMICs) are available for a range of LO and IF frequencies suitable for mm‐wave arrays. These devices provide 360° of phase change with a least significant bit (LSB) of 5.625°. This resolution allows analog beamforming with a scan angle accuracy to a fraction of a degree. The system configuration in Figure 1.5d is particularly attractive since the devices in the LO path are typically operated in saturation. Consequently, variable losses that usually change with any phase shift are avoided in this scheme.
It is should be pointed out that a more elegant and highly desirable solution to forming multiple beams in a hybrid fashion is to employ analog multi‐beam antennas rather than using subarrays of antenna elements. In principle, the entire antenna aperture can be shared by all the users. However, the generation of multiple individually steerable analog beams is in itself a huge challenge. Unfortunately, there exist only a very limited number of solutions that can be incorporated into the hybrid beamforming configurations discussed above. A number of the remaining chapters in this book will explore various ideas to fill such current technology gaps.
Notice that it is expected that both fully digital beamformers and hybrid beamformers will be employed for 5G deployments. Some of the anticipated use cases envisaged by industry are listed in Table 1.1 [4].
Table 1.1 Use cases for digital and hybrid beamforming.
Source: From [4] / with permission of 5G Americas.
| Beamforming type | Use cases |
|---|---|
| Digital beamforming | Sub‐6 GHz massive MIMO: MU‐MIMOSub‐6 GHz macro cell2D beamformingFixed wireless access |
| Hybrid beamforming | mm‐wave based systemsSub‐6 GHz small cells/hot spot coverageFixed wireless accessMassive MIMO macro cells |
1.4 Analog Multiple Beamforming
There are a number of ways to create steerable antenna beams in an analog manner. These include the use of circuit-type beamformers, reflectors, lenses, and phased arrays. These and other more advanced methods will be presented in later chapters. We review some of the basic concepts here.
The most common analog beamforming antennas are phased arrays. The original technology dates back to the mid‐twentieth century. It remained primarily as a military technology until the 5G era. In a phased array, the same signal is fed to each antenna element. The amplitudes of the elements are weighted according to the desired shape of the beam, i.e., the shape of the radiated pattern, and then phase‐shifters are used to steer the beam emitted by the array into the desired direction. In order to save cost, the current commercial 5G mm‐wave systems employ phased arrays to conduct analog beamforming. Both the base station and the user equipment (UE) use a number of fixed weight settings, or sets of phase‐shifting values, to produce different beams pointed in specific directions. There are only two beams pointed in the same direction at any given point of time, each for the horizontal and vertical polarizations, respectively. Consequently, current base stations steer their beams sequentially in different directions to provide the desired coverage. The system capacity could be СКАЧАТЬ