Thermal Energy Storage Systems and Applications. Ibrahim Dincer

Чтение книги онлайн.

СКАЧАТЬ target="_blank" rel="nofollow" href="#fb3_img_img_b52172e0-a93d-50c8-b268-730d3a8a806e.png" alt="equation"/>

      where the units of ν are m²/s in the SI system and ft²/s in the English system.

      From the viscosity perspective, the types of fluids may be classified into the two groups that follow below.

      (a) Newtonian Fluids

These fluids have a dynamic viscosity dependent upon temperature and pressure and independent of the magnitude of the velocity gradient. For such fluids, Eq. (1.44) is applicable. Some examples are water and air.

      (b) Non‐Newtonian Fluids

      Fluids that cannot be represented by Eq. (1.44) are called non‐Newtonian fluids. These fluids are very common in practice and have a more complex viscous behavior due to the deviation from Newtonian behavior. There are several approximate expressions to represent their viscous behavior. Some examples of such fluids are slurries, polymer solutions, oil paints, toothpaste, and sludges.

      1.5.3 Equations of Flow

      The basic equations of fluid flow may be derived from important fundamental principles, namely, conservation of mass, conservation of momentum (i.e. Newton's second law of motion), and conservation of energy. Although general statements of these laws can be written (applicable to all substances, e.g. solids and fluids), in fluid flow these principles can be formulated as a function of flow parameters, namely, pressure, temperature, and density. The equations of motion may be classified into two general types: the equations of motion for inviscid fluids (i.e. frictionless fluids) and the equations of motion for viscous fluids. In this regard, we deal with the Bernoulli equations and Navier–Stokes equations.

      (a) Continuity Equation

The continuity equation is based on the conservation of mass principle. The requirement that mass be conserved at every point in a flowing fluid imposes certain restrictions on the velocity u and density ρ. Therefore, the rate of mass change is zero, so that for a steady flow, the mass of fluid in the control volume remains constant, and therefore the mass of fluid entering per unit time is equal to the mass of fluid exiting per unit time. We now apply this idea to a steady flow in a stream tube (Figure 1.8). The continuity equation for the flow of a compressible fluid through a stream tube is

Figure 1.8 Fluid flow in a stream tube.

(1.46)

      where ρ₁δA₁u₁ is the mass entering per unit time (at section 1) and ρ₂δA₂u₂ is the mass exiting per unit time (at section 2).

In practice, for the flow of a real fluid through a pipe or a conduit, the mean velocity is used since the velocity varies from wall to wall. Then, Eq. (1.46) can be rewritten as

(1.47)

      where and are the mean velocities at sections 1 and 2.

For fluids that are considered as incompressible, Eq. (1.47) is simplified to the following, since ρ₁ = ρ₂:

      (1.48)

      The various forms of the continuity equation for steady‐state and unsteady‐state cases are summarized below:

       The steady‐state continuity equation for an incompressible fluid in a stream tube:(1.49)

       The unsteady‐state continuity equation for an incompressible fluid in a stream tube:(1.50)

       The steady‐state continuity equation for an incompressible fluid in cartesian coordinates:(1.51)

       The unsteady‐state continuity equation for an incompressible fluid in cartesian coordinates:(1.52)

       The steady‐state continuity equation for an incompressible fluid in cylindrical coordinates:(1.53)

       The steady‐state continuity equation for a compressible fluid in a stream tube:(1.54)

       The steady‐state continuity equation for a compressible fluid in cartesian coordinates:(1.55)

       The steady‐state continuity equation for a compressible fluid in cylindrical coordinates:(1.56)

       The unsteady‐state continuity equation for a compressible fluid in a stream tube:(1.57)

       The unsteady‐state continuity equation for a compressible fluid in cartesian coordinates:(1.58)

       The unsteady‐state continuity equation for a compressible fluid in cylindrical coordinates:(1.59)

      (b) Momentum Equation

      The analysis of fluid‐flow phenomena is fundamentally dependent on the application of Newton's second law of motion, which is more general than the momentum principle, stating that when the net external force acting on a system is zero, the linear momentum of the system in the direction of the force is conserved in both magnitude and direction (the so‐called conservation of linear momentum). In fact, the momentum principle is concerned only with external forces, and provides useful results in many situations without requiring much information on the internal processes within the fluid. The momentum principle finds applications in various types of flows (e.g. steady or unsteady, compressible or incompressible).

The motion of a particle must be described relative to an inertial coordinate frame. The one‐dimensional momentum equation at constant velocity can be written as follows:

(1.60)

where СКАЧАТЬ