Thermal Energy Storage Systems and Applications. Ibrahim Dincer

Чтение книги онлайн.

СКАЧАТЬ for use with all standard thermocouples or platinum resistance thermometers with several digits and 0.1°C resolution.Table 1.1 Some of the most common thermocouples.TypeCommon namesTemperature range (°C)TCopper–constantan (C/C)−250 to 400JIron–constantan (I/C)−200 to 850ENickel chromium–constantan or chromel–constantan−200 to 850KNickel chromium–nickel aluminum or chromel–alumel (C/A)−180 to 1100—Nickel 18% molybdenum–nickel0 to 1300NNicrosil–nisil0 to 1300SPlatinum 10% rhodium–platinum0 to 1500RPlatinum 13% rhodium–platinum0 to 1500BPlatinum 30% rhodium–platinum 6% rhodium0 to 1600

      It is important to emphasize that before temperature can be controlled, it must be sensed and measured accurately. There are several potential sources of error for temperature measurement devices, including sensor properties, contamination effects, lead lengths, immersion, heat transfer, and controller interfacing. In temperature control, there are many sources of error that can be minimized by careful consideration of the type of sensor, its working environment, the sheath or housing, extension leads, and the instrumentation. An awareness of potential errors is vital in many applications dealt within this book. Selection of temperature measurement devices is a complex task and has been discussed only briefly here. It is important to remember the following: “choose the right tool for the right job.”

      1.3.4 Specific Volume and Density

      The specific volume v is the volume per unit mass of a substance, usually expressed in cubic meters per kilogram (m³/kg) in the SI system and in cubic feet per pound (ft³/lb) in the English system. The density ρ of a substance is defined as the mass per unit volume, and is therefore the inverse of the specific volume:

      (1.5)

      The units of density are kg/m³ in the SI system and lb/ft³ in the English system. Specific volume is also defined as the volume per unit mass, and density as the mass per unit volume, that is,

      (1.6)

      and

      (1.7)

      Both specific volume and density are intensive properties and are affected by temperature and pressure.

      1.3.5 Mass and Volumetric Flow Rates

      Mass flow rate is defined as the mass flowing per unit time (kg/s in the SI system and lb_m/s in the English system). Volumetric flow rates are given in m³/s in the SI system and ft³/s in the English system. The following expressions can be written for the flow rates in terms of mass, specific volume, and density:

      (1.8)

      and

      (1.9)

1.4 General Aspects of Thermodynamics

      In this section, we briefly introduce some general aspects of thermodynamics that are related to energy storage systems and applications.

      1.4.1 Thermodynamic Systems

      A thermodynamic system is a device or combination of devices that contains a certain quantity of matter. It is important to carefully define a system under consideration and its boundaries. We can define three important types of systems as follows:

       Closed system: This is defined as a system across the boundaries of which no material crosses. It, therefore, contains a fixed quantity of matter. In some books, it is also called a control mass.

       Open system: This is defined as a system in which material (mass) is allowed to cross its boundaries. The term open system is also called a control volume.

       Isolated system: This is a closed system that is not affected by the surroundings. No mass, heat, or work crosses its boundary.

      1.4.2 Process

      A process is a physical or chemical change in the properties of matter or the conversion of energy from one form to another. In some processes, one property remains constant. The prefix “iso” is employed to describe such a process, for example, isothermal (constant temperature), isobaric (constant pressure), and isochoric (constant volume).

      1.4.3 Cycle

      A cycle is a series of thermodynamic processes in which the end‐point conditions or properties of the matter are identical to the initial conditions.

      1.4.4 Thermodynamic Property

      This is a physical characteristic of a substance, which is used to describe its state. Any two properties usually define the state or condition of a substance, from which all other properties can be derived. Some examples are temperature, pressure, enthalpy, and entropy. Thermodynamic properties are classified as intensive properties (independent of the mass, e.g. pressure, temperature, and density) and extensive properties (dependent on the mass, e.g. mass and total volume). Extensive properties on a per unit mass basis, such as specific volume, become intensive properties. Property diagrams of substances can be presented in graphical form to summarize the main properties listed in property tables, for example, refrigerant tables.

      1.4.5 Sensible and Latent Heats

It is known that all substances can hold a certain amount of heat; this property is their thermal capacity. When a liquid is heated, its temperature rises to the boiling point. This is the highest temperature that the liquid can reach at the measured pressure. The heat absorbed by the liquid in raising the temperature to the boiling point is called sensible heat. The heat required to convert the liquid to vapor at the same temperature and pressure is called latent heat. This is the change in enthalpy during a state change (the amount of heat absorbed or rejected at constant temperature at any pressure, or the difference in enthalpies of a pure condensable fluid between its dry saturated state and its saturated liquid state at the same pressure).

      1.4.6 Latent Heat of Fusion

      Fusion is associated with the melting and freezing of a material. For most pure substances, there is a specific melting/freezing temperature, relatively independent of the pressure. For example, ice begins to melt at 0°C. The amount of heat required to melt one kilogram of ice at 0°C to one kilogram of water at 0°C is called the latent heat of fusion of water, and equals 334.92 kJ/kg. The removal of the same amount of heat from one kilogram of water at 0°C changes it back to ice.

      1.4.7 Vapor

      A vapor is a gas at or near СКАЧАТЬ