First virtual Bilateral Conference on Functional Materials (BiC-FM). Сборник статей
Чтение книги онлайн.
Читать онлайн книгу First virtual Bilateral Conference on Functional Materials (BiC-FM) - Сборник статей страница 6
Название: First virtual Bilateral Conference on Functional Materials (BiC-FM)
Автор: Сборник статей
Издательство: Aegitas
Жанр: Техническая литература
isbn: 9780369404497
isbn:
Skolkovo Institute of Science and Technology, Moscow, Russia
Functional nanocomposites are allowing fundamental changes to the way system and material monitoring and testing takes place, both during manufacturing as well as during composite usage lifecycle [1, 2]. One such application of these materials is the replacing of traditional sensors for deformation sensing, allowing the reduction in cost and weight of systems and potential usage has already been highlighted in fields such as the automotive, aerospace, renewable energy and sensor manufacturing sectors [3, 4].
In recent years, nano-carbon particles, in particular, carbon nanotubes and graphene/derivatives, have been under intense scientific scrutiny as additives for composite manufacturing, not only increasing the mechanical properties of composites but allowing the final composites to be electrically conductive and piezoresistive in nature [5, 6].
In this work, industrial masterbatches have been used to manufacture functional nanocomposites and evaluate their feasibility for large scale production of strain sensing thermoplastic nanocomposites. Masterbatches are high weight/volume fraction compounds premixed with nanoadditives in a selected matrix and provide a safe medium for implementing nanomaterials on an industrial scale. From a safety, production line modification and financial standpoint, masterbatches are the most feasible implementation medium for large scale production. However, very few publications deal masterbatch-based nanocomposites and of those available, even fewer deal with piezoresistivity or self-diagnostics.
Six types of carbon nanoparticle masterbatches were employed during this study, each type containing either single-wall carbon nanotubes (SWCNT), multi-wall carbon nanotubes (02 types, MWCNT), graphene (G), reduced graphene oxide (RGO) or nitrogen doped graphene (NDG). These particles were added to an epoxy matrix at three weight percentages of interest, 0.5 %, 1.0 % and 2 %. The electrical and piezoresistive properties of the formulated nanocomposites were studied, with higher weight fractions yielding higher electrical conductivities whereas the same yielded lower piezoresistive response. Carbon nanotube (CNT) based nanocomposites outperformed graphene/derivative nanocomposites in terms of electrical conductance, showing resistivities between 2 – 106 Ohm∙cm as compared to G/RGO/NDG samples, with values between 1011-1012 Ohm∙cm. CNT based nanocomposites showed strain based gauge factors between ~2–7, while graphene/derivative nanocomposites showed extremely high resistivities infeasible for piezoresistive monitoring at the studied weight percentages. A clear relationship between the attained electrical conductance of CNT nanocomposites and their strain sensing ability (gauge factor) has also been established, with the dependency following a semi-logarithmic system; GF=A*log(R0)+B.
References
1. Lee, J. and B.L. Wardle. Nanoengineered In Situ Cure Status Monitoring Technique Based on Carbon Nanotube Network. in AIAA Scitech 2019 Forum. 2019. San Diego, California.
2. Cao X., et al., Strain sensing behaviors of epoxy nanocomposites with carbon nanotubes under cyclic deformation. Polymer, 2017. 112: p. 1–9.
3. Kumar A., K. Sharma, and A.R. Dixit, Carbon nanotube- and graphene-reinforced multiphase polymeric composites: review on their properties and applications. Journal of Materials Science, 2019. 55(7): p. 2682–2724.
4. Camilli L. and Passacantando M., Advances on sensors based on carbon nanotubes. Chemosensors, 2018. 6(4): p. 62–80.
5. Atif R., I. Shyha, and F. Inam, Mechanical, thermal, and electrical properties of graphene-epoxy nanocomposites-A Review. Polymers, 2016. 8(8): p. 281–317.
6. Caradonna A., et al., Electrical and thermal conductivity of epoxy-carbon filler composites processed by calendaring. Materials (Basel), 2019. 12(9): p. 1–17.
Anisotropic electrical conductivity in graphene films with vertically aligned single-walled carbon nanotubes: new advances in mechanisms and applications
Glukhova O.E.1,2, Slepchenkov M.M. 1
1 – Saratov State University, Saratov, Russia
2 – I.M. Sechenov First Moscow State Medical University, Moscow, Russia
In this paper, we suggest an idea of a new approach to control the electrical conductivity and its anisotropy in graphene-nanotube films with vertically oriented single-walled carbon nanotubes (SWCNTs) seamlessly connected to graphene. The basis of this approach is the phenomenon of aromaticity occurred in the hexagons of armchair-type SWCNTs at a certain nanotube length, which induces the oscillations of electronic characteristics with increasing the SWCNT length [1]. The proposed idea was tested on the example of two graphene nanomesh (GNM) atomistic models with nanoholes for SWCNTs with the chirality (6,6) and (9,9) in the case of sequentially increasing the SWCNT length. These types of SWCNTs were revealed using original approach called “virtual growing”, which shown that among the armchair SWCNTs with a diameter of 0.6–1.2 nm, the energetically favorable SWCNT- graphene junction will be formed with the SWCNTs (6,6) and (9,9). The calculations of geometric parameters of graphene-nanotube atomistic models were obtained using the self-consistent charge density functional tight-binding (SCC-DFTB) method [2]. The calculations of the electron transmission function T(E) and electrical conductivity G were carried out at 300 K using the Landauer-Buttiker formalism [3]. It was found that the nanoholes in monolayer graphene form conducting pathways in one direction, inducing anisotropy of the conducting properties. The anisotropy of the G value reaches 5 times. The formation of SWCNTs in the nanoholes does not remove anisotropy, amplifying it up to 7 times. The value of electrical conductivity G is strongly influenced by the length of the formed nanotube. It was found that a sharp increase in the value of G occurs at a certain length of 0.615 nm, 0.984 nm, 1.353 nm, and so on with in steps of 0.369 nm. These values of the SWCNT length were determined by the number of atomic layers in the SWCNT framework that is a multiple of three. Especially noticeable jumps in electrical conductivity occur for the armchair direction of electron transport. Thus, by adjusting the SWCNT length, it is possible to enhance or weaken the anisotropy of the conductive properties of graphene-nanotube films.
Acknowledgement. This work was supported by the Ministry of Science and Higher Education of the Russian Federation, grant FSRR-2020-0004.
References:
[1] F. Buonocore, F. Trani, D. Ninno, A. Di Matteo, G. Cantele, G. Iadonisi, Nanotechnology, 19, 025711 (2008).
[2] M. Elstner, D. Porezag, G. Jungnickel, J. Elsner, M. Haugk, Th. Frauenheim, S. Suhai, G. Seifert, Phys. Rev. B 58, 7260 (1998).
[3] S. Datta, Quantum Transport: Atom to Transistor. 2nd ed. Cambridge: Cambridge University Press; 2005
O.E. Glukhova received Ph.D. in Vacuum and Plasma Electronics (1997) and Dr. Sc. in Solid State Electronics and Nanoelectronics (2009) from the Saratov State University, Russia. She is a head of Department of Radiotechnique and electrodynamics at Saratov State University and leads the Division of Mathematical modeling in Educational and scientific institution of nanostructures and biosystems at Saratov State University. Her main fields of investigation are: nanoelectronics, molecular modeling of biomaterials and nanostructures, molecular electronics, mechanics of nanostructures, quantum chemistry and molecular dynamics, carbon nanostructures (fullerenes, nanotubes, graphene, graphane). She has published more 200 peer-reviewed journal papers and СКАЧАТЬ