The Allotment Book. Andi Clevely

Чтение книги онлайн.

СКАЧАТЬ in the sun, with useful storage space beneath it.

      ▸ Attach a collapsible table-top or work surface to the outside for potting and sowing activities, especially if space is restricted inside the shed. You might want an old table or home-made work surface within for various jobs and as extra storage. If you make your own, consider a drop-down top hinged to the inside wall, supported by folding brackets.

      SECURITY

      The risks of forcible entry and theft from an unattended shed are high, and exempt from many association insurance schemes, but guidelines have been issued by police forces and site committees to help prevent loss.

      ▸ Provide a strong door and a large lock or padlock.

      ▸ Cover any windows with rigid wire mesh or grilles.

      ▸ Conceal screw fittings with metal plates.

      ▸ Use clutch head or ‘one-way’ screws because they are hard to remove.

      ▸ Fit a battery-operated alarm.

      ▸ Mark tools with barcodes or postcodes.

      ▸ Anchor the shed to piles so it is hard to topple over.

      ▸ Cover walls with trellis and plants for disguise and stability.

      The greenhouse Adding a greenhouse to the site can enhance your growing options by offering a protected environment for tender crops and those at sensitive stages of growth, especially early and late in the season. Some gardeners consider a cold frame more essential and versatile (see pages 48–9), but the two structures can work hand in hand, and it is always an advantage to have an all-weather place with enough headroom for working comfortably. A greenhouse can accommodate larger plants, though, including permanent fruiting climbers such as a grapevine or trained apricots.

      The minimum useful size is considered to be 2.4m (8ft) long by 1.8m (6ft) wide, or 1.2m (4ft) for a lean-to model, but even the smallest house can be an asset in a limited area, especially if you arrange the internal layout to exclude a permanent central pathway. Although a great variety of shapes is possible, the most serviceable is the traditional span design, with sides that are upright or gently inclining inwards, and glazed to ground level. Some kinds need a foundation similar to that used for sheds (see page 41), while many aluminium models can be pegged down into level ground.

      MATERIALS Greenhouse frames usually come in softwood or aluminium, while the glazing is either glass or plastic.

      Softwood is cheap, but the construction needs to be strong and this can reduce the total glazed area. Regular maintenance, even of comparatively durable cedar models, is essential for long life.

      Aluminium-framed greenhouses are virtually indestructible and maintenance-free, and have thin glazing bars that maximize light transmission. They are more expensive than timber models, though, and need a very firm base to ensure rigidity.

      Glass is the best glazing material because of its good light transmission and heat retention. It is, however, expensive, heavy and easily broken – a possible risk on allotments where vandalism is a problem, but if treated with care, it will last indefinitely.

      CHECK POINTS

      ▸ Check if a base is included with your chosen model, and whether this creates a step or barrier in the doorway.

      ▸ The door should fit tightly and include a kick panel at the bottom for safety; sliding doors make it easier to adjust the ventilation.

      ▸ Make sure the height at the ridge provides adequate headroom.

      ▸ Most greenhouses come with a single ventilator, which provides insufficient ventilation: add another on the opposite side of the roof, and at least one (possibly a louvred type) in the side for a free flow of air.

      Plastic is lighter and cheaper than glass, but has a limited life according to its type. Flat and corrugated polyester rigid panels are the most expensive. They are almost as clear as glass, but difficult to keep clean. Polycarbonate, especially if double or triple-walled, is more serviceable and affordable. Cheapest of all is flexible plastic sheeting, with a useful life of five years or more, after which it turns yellow and brittle.

      FITTING & EQUIPPING Careful organization of a greenhouse is vital, especially in spring and autumn when the house can be full of plants waiting to go out or plants just brought in for frost protection.

      Plan the floor space first. You might prefer a solid floor with fixed staging round the sides, or ground-level growing space, perhaps in raised beds and with removable staging that can be moved outside in summer or collapsed for storing. Growing bags can be arranged on the soil or solid floors and on staging to house plants temporarily. Shelves on the sides and in the roof can extend the growing and display space, while brackets will support hanging baskets and strings or wires for training climbing plants.

      POLYTUNNEL ALTERNATIVE

      Cheaper and easier to erect than a greenhouse, a polytunnel can offer most of the advantages of a greenhouse, although the cladding of heavy-duty plastic sheeting is less heat-retentive and condensation can be a problem. Depending on its quality, the plastic sheet will need replacing every 3–5 years. Make sure there is a door at each end of the tunnel for efficient ventilation.

      Fitting automatic vent openers that can be adjusted to open at a certain temperature can relieve you from worry and prevent injury to plants. An overhead reservoir can be used to supply water to capillary matting on the staging or to drip tubes positioned in containers to alleviate watering chores. Blinds are expensive, but shade netting is available for installing in summer as an alternative to applying shade paint.

      TEMPORARY FRAMES

      You may be reluctant to sacrifice good growing space to a structure that might be needed for only part of the year, perhaps for spring frost protection. Lightweight collapsible frames are available that can be dismantled when they are not needed. Alternatively, you could make your own from a variety of materials. For example, a large bottomless box with its top replaced by a sheet of clear plastic can cover several seed trays (on very cold nights simply spread an old blanket or sheets of bubble polythene over the top). An enclosure of straw bales covered with old car windscreens or double glazing panels makes a snug frame, and the straw can be used afterwards for mulching or as a carbon ingredient in a compost heap (see pages 116–17). Professional growers often arrange empty crates and boxes to make the frame walls, draping black polythene over the walls and floor like a pond liner, and then sheeting over the top with thick polythene (polytunnel grade).

      Cold frames Although they are sometimes regarded as simple greenhouse accessories, cold frames are versatile, sometimes portable, infinitely adjustable and often efficient substitutes for a greenhouse. They are also less expensive than a greenhouse, and provide more space and greater adjustability than cloches. Easily constructed at home, they can be adapted to span a narrow bed or to fit on top of a compost heap to make a hot bed (see page 53).

      At its simplest the standard frame is a four-sided box structure with a lid that slopes to shed water and opens to admit air. It is accessed from the top, via a lid that is glazed with plastic or glass, and that can be lifted or removed to adjust ventilation. СКАЧАТЬ