Welding For Dummies. Steven Robert Farnsworth
Чтение книги онлайн.

Читать онлайн книгу Welding For Dummies - Steven Robert Farnsworth страница 13

Название: Welding For Dummies

Автор: Steven Robert Farnsworth

Издательство: John Wiley & Sons Limited

Жанр: Техническая литература

Серия:

isbn: 9781119849650

isbn:

СКАЧАТЬ style="font-size:15px;">      Most welding equipment uses some sort of electrical power, so electric shock is a very real risk in the welding trade. Electric shocks can cause injury, death, fires, and explosions; here are a few tips to keep in mind in an effort to keep your risk for electric shock at an absolute minimum.

      ❯❯ Don’t allow electrode holders to touch wet gloves or wet skin.

      ❯❯ When using extension cords, be sure to plug the power tool you’re using into the extension cord before plugging the extension cord into the wall outlet. Then be sure you unplug the extension cord before you unplug the power tool.

      ❯❯ Be sure your extension cords don’t have kinks, knots, or nicks. Inspect your cords before you use them (every time), and get rid of the cord immediately if you notice damage.

      ❯❯ If a cable or cord feels hot to the touch when you’re using it, discontinue use right away. The heat means that the cord isn’t big or heavy duty enough for the amount of electricity you’re using, and that can be very dangerous.

      ❯❯ If any of the power tools or extension cords you’re using has a three-pronged plug and is missing one of the prongs, don’t use the tool or cord under any circumstances.

      ❯❯ Keep all power tools and cords dry at all times.

      ❯❯ If your power tools have worn or broken parts, repair or replace the broken parts immediately.

      ❯❯ If your power tools have keys, chucks, or wrenches attached to them, be sure to remove those items before plugging in or using those tools. They can create a hazard if they’re still inserted when the power tool starts moving or spinning.

      ❯❯ If a power tool’s housing is cracked, don’t use it.

      ❯❯ Make sure you provide a ground for any electric tool or device that requires grounding. (Read tool and equipment instructions thoroughly to determine whether you need to provide a ground.)

Shielding yourself from burns

      You can suffer burns from two different sources while welding: hot metal and ultraviolet light. Burns caused by hot metal are self-explanatory, but you may not realize at first that you can also receive a burn from the ultraviolet light that’s a part of arc welding rays.

      These rays are the same as what’s generated by the sun, except welding rays are much more concentrated. I’m sure as a child you heard to never look directly at the sun, right? Well, you certainly don’t want to look directly at a welding arc either. If you do, you can easily suffer burns on your retina, and you may lose part of your eyesight. These types of burns are called flash burns or arc eye, and as you can imagine, they’re extremely painful. You feel like you have something in your eye, and usually that’s caused by a blister on your eyeball (fun!). And just because you don’t feel the effects immediately doesn’t mean you haven’t been affected – they start about 8 to 24 hours after you look at a welding arc. Damage can occur even when the light is reflected off of a shiny surface.

      To reduce the risk of burns while welding, minimize the amount of ultraviolet light reflected from the welding arc by painting the surfaces of your welding workspace (even the walls) with a flat, dark-colored paint (black and dark blue are good choices). You should also always wear a welding helmet and protective clothing, as I describe in “Gearing Up to Protect Yourself” earlier in the chapter.

      

Metal you’ve just welded will be hot, of course, so you need to make sure no one burns themselves on it. If you have to walk away from the weld, even for a minute, write “Hot” on the piece with a soapstone so passersby know not to touch.

      

Handle all hot metal with pliers to prevent burning your hands, even when wearing gloves. Another habit to develop is using the back of your hand (cautiously) to check to see whether something is hot. Put the back of your hand about a foot away from the potentially hot piece and move it slowly toward the piece. If it’s too hot, you’ll be able to tell when the back of your hand gets within two or three inches.

Maintaining your equipment

      If you want to create the safest possible working environment for your welding jobs, you have to maintain your equipment extremely well. If your welding equipment and tools are falling apart, they’re just waiting to cause an accident, and almost all those types of accidents are preventable if you take care of your gear. Here’s how you can do just that:

      ❯❯ Perform a regular check of all equipment. Keep a list of all your equipment on a notebook or clipboard and do a monthly check through all of it to make sure everything is in good working order. Pay special attention to your electric equipment, hoses, cords, and regulators to make sure you don’t get shocked because of faulty equipment, and also to see that you don’t have a potentially harmful gas leak.

      ❯❯ Don’t hesitate to get professional repair help. If you notice something odd or potentially dangerous with some of your equipment and you don’t feel confident in your ability to remedy the problem on your own, take the equipment to a qualified service professional. Your local welding supply store should have someone on staff who can make those kinds of repairs, or be able to point you toward someone who can.

      ❯❯ If a tool or piece of equipment isn’t working the way it should, stop using it! Don’t fool yourself into thinking that you can “work out a bug” by just using a tool a little more.

      

Make sure the heads of your chisels and punches are ground round to keep the chips around the head from flying off when you’re using them. That’s a common but easily fixable problem.

      Being Prepared for Injuries and Accidents

      If you follow the safety guidelines I describe throughout this chapter, you greatly reduce the chances of an accident occurring in your welding shop. However, if an accident does happen, you need to know exactly what to do and how to handle it. That’s what I tackle in this section.

      

You should always have a telephone handy in case of an emergency, so you can quickly dial 911. It’s also a good idea to let friends and family know when you’re working in the shop so that they’ll notice if you don’t come back within a reasonable amount of time.

Equipping your first-aid kit

      Keeping a first-aid kit in your welding shop is always a good idea so that you have the items you need if an accident occurs. Here’s what I recommend you include in that kit:

      ❯❯ Sterile bandages of various sizes

      ❯❯ Cold pack

      ❯❯ Sterile gauze in various sizes and lengths

      ❯❯ Burn gel or spray

      ❯❯ Antibiotic ointment

      ❯❯ Hydrogen peroxide

      ❯❯ Sterile compress dressings of various sizes

      ❯❯ Sterile gloves

      ❯❯ Tweezers

      ❯❯ Sterile adhesive tape

      ❯❯ Eyewash

      ❯❯ СКАЧАТЬ